Payment & Shipping Terms:
|Color:||Blue, Green, Black||Fineness (μm):||≤18|
|Acid Resistant (5%H 2 SO 4 30min):||Good||Insulation:||Excellent|
|Drying:||100~150°C/ 8-10 Min||Firing:||850°C/ 8-12min|
Good Dielectric 850 DegreeC Fired Overglaze Non Conductive Paste
for 430 Type Stainless Steel Heaters
FG850X series is an environmental friendly high temperature(850 degreeC fired) overglaze non conductive paste designed as overlay or interbedded insulation.
It is non-toxic element up to European RoHS environmental regulation (2002/95/EC), and has good compatibility with various ceramic substrates.
Also, if a protective insulation is required for the heating element, the same dielectric paste that has been used to insulate the steel also could be chosen.
The overglaze non conductive paste FG850X series could be screen printed on ceramics and stainless steel substrates for applications such as resistor networks, resistor plate, heating element, sensitivity element for protective insulation purposes.
It is dried at 125℃ and fired using a one hour 850℃ profile in a belt furnace with 15 minutes at peak temperature.
Overglaze Thick Film Paste FG850X
|Solid Content (%)||76±1|
|Color||Blue, Green, Black, Gray|
(5%H 2 SO 4 30min)
(Stainless Steel mesh)
|Typical Drying Condition||100~150°C/(8-10min)|
|Typical Firing Condition||850°C/(8~12min)|
|Shelf Life||Six Months from Date of Shipment|
1. Excellent insulating resistance
The overglaze insulating paste FG850X series is with excellent insulating resistance. The high breakdown voltage could be up to 2000 VAC/min (fired thickness >80μm, 25℃).
2. Strong adhesion
The overglaze insulating paste FG850X series is with strong adhesion. Place the heating plate on a round tube of 40mm diameter, and bend it at 90 degrees with uniform force, no crack on the dielectric layer of the stainless steel plate.
3. Excellent printing characteristics
The paste is with proper viscosity, good thixotropy and levelling properties which enables excellent printing properties. After screen printing, the film is well-distributed, compact, clear and smooth.
4. Smooth and fine surface
The fired dielectric surface is with uniform color, and flatness and smooth.
5. Good Compatibility
The overglaze paste is with good compatibility with resistor paste, dielectric paste and conductor paste. After fired, there is no bubbles, no obvious yellowing, and with smooth and dense surface. The resistance re-fired drift is within 5%.